Events in our system are self-managed.  Group and event managers are encouraged to review privacy and security settings, and adjust them if needed.  If you need assistance please contact Indico Support - contact Help at bottom of page. https://learn.getindico.io/categories/managing/

17–22 Sept 2023
Victoria Conference Centre
Canada/Pacific timezone
Fairmont Empress (Conference Hotel): All reservations must be made by phone or email now. https://icis2023.triumf.ca/accommodations.html

Visible Camera-Based Diagnostic to Study Negative Ion Beam Profiles in ROBIN Ion Source

18 Sept 2023, 10:00
20m
Victoria Conference Centre

Victoria Conference Centre

Contribute Oral

Speaker

Mr Sidharth Kumar Dash (1.Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India 2. Homi Bhabha National Institute, Anushaktinagar, Mumbai, Maharashtra 400094, India.)

Description

The ion beam divergence & uniformity/homogeneity apart from beam energy are two crucial parameters of a large-size ion source-based NBI (Neutral Beam Injector) for the physical interpretations of beam dynamics & control of its extraction system. Characterization of $H^-$ ion beam in ROBIN (Rf Operated Beam source in India for Negative ion) source using two orthogonally placed cameras installed at the top & a side port of the beamline, at an axial distance $\sim1.42$m & $\sim1.90$m from the grounded grid (GG) respectively are presented in this report. As the beam particles travel through the background gas, it emits photons in the visible range due to the production of excited species. The cameras characterize the beam profile based on the photon intensity level that is proportional to the beam current density. The ROBIN ion source with masked large area grid (LAG) extraction system, having only $146$ open beamlet apertures dispersed equally on two grid segments for beam extraction. The grid segments are inclined by $0.873^{\circ}$ from the vertical plane towards the forward direction. The exposed area of the grid segments focuses the beam vertically at a distance of $\sim3$m. The initial observations through lateral camera at $1.9$m shows: individual beamlet identities are lost & each segment forms a Gaussian-type beam profile which eventually merges into a super-beam with a nearly flat-top profile with Gaussian wings at the edges. The shape of the super-beam depends on the mechanical beam focussing & the space-charge blowing-up effect. The estimation of beam uniformity/homogeneity & divergence is complex & so a beam modeling activity is initiated. The total beam profile is obtained by integrating all the beamlet profiles over the whole extraction area. The correlation between the measurements & simulation of the beam is highlighted in the report. Tomographic analysis using camera data & analytical models is the future scope of action.

Funding Agency Homi Bhabha National Institute
Email Address sidharth.dash@ipr.res.in
I have read the Code of Conduct to attend ICIS2023. Yes

Primary author

Mr Sidharth Kumar Dash (1.Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India 2. Homi Bhabha National Institute, Anushaktinagar, Mumbai, Maharashtra 400094, India.)

Co-authors

Prof. Mainak Bandyopadhyay (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India. 2. ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India. 3. Homi Bhabha National Institute, Anushaktinagar, Mumbai, Maharashtra 400094, India.) Mr Kaushal Pandya (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India.) Mr Manas Bhuyan (ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India.) Mr Ratnakar Yadav (ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India.) Mr Hiren Mistri (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India) Dr Mahendrajit Singh (Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India. 2. ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428, India. 3. Homi Bhabha National Institute, Anushaktinagar, Mumbai, Maharashtra 400094, India.)

Presentation materials